PANELS FOR DOORS & INTERNAL PARTITIONS
X-TREME
Technical Specifications
Sandwich panel, structural, self-supporting, composite, multilayer formed by a foam
polystyrene nucleus, high quality monolayer, combined with liquid aluminium sheets
prepainted and supported by phenolic resin 1,5 mm thickness.
The physic mechanic specifications of the foam polystyrene and of the phelonic support
suppor make “X-TREM” particularly suitable for outside. The high resistance to heat of the
foam polystyrene, allows the dark colours panels “X-TREME” to avoid any partial softening or
melting of the foam.
In fact the maximum irradiation temperatures typical of any colour, are always lower than the
instability ones typical of the foam polystyrene, provided that the panel are in vertical position.
COMPAUND
Technical Specifications
Sandwich panel, structural, self-supporting, composite, multilayer formed by a foam
polystyrene nucleus, high quality monolayer, combined with laminated plastic layers.
PANELS FOR CLADDING
REYNOBOND ROYAL
This type of panel provides innovatory solutions for industrial and transport engineers.
It can be used for rollers, cases, containers, machine protection and enclosures, but especially
for cladding on public transport vehicles, trailers, trucks etc.
It consists of two pre-coated aluminium sheets bonded onto both side of a polyethylene core.
Bonding of the aluminium and core is achieved by both chemical and mechanical action, which
gives it remarkable bond integrity. An exceptionally flat, corrosion-resistant panel, which is easy
to use.
REYNOBOND ROYAL 55
- Two 0.5 mm. thick pre-coated aluminium sheets.
- 3.4 and 6 mm. standard nominal panel thickness.
- weight and density of the panels:
3 mm – 4.59 Kg/m2
4 mm – 5.51 Kg/m2
4 mm (FR) – 7.5 Kg/m2
6 mm – 7.36 Kg/m2
- upper sheet finish:
PVDF 70/30
These panels are particularly UV and weather resistant and come in several standard colours.
The range can be extended to any other colours (RAL, NCS. Etc.) subjected to a minimum
production quantity.
- Lower sheet finish: protective primer.
REYNOBOND ROYAL 33
- Two 0.3 mm. thick pre-coated aluminium sheets.
- 2.3 and 4 mm. standard nominal panel thickness.
- panel weight (density):
2 mm – 2.90 Kg/m2
3 mm – 3.80 Kg/m2
4 mm – 4.75 Kg/m2
Upper and lower sheet finishes polyester.
Available in standard colours with 25% to 80% gloss rating. This range can be extended to any
other colours (RAL, NCS, etc.) subjected to a minimum production quantity.
Applications
a) Architectural uses
Reynobond Royal is suitable for outdoor and indoor architectural applications in new buildings
or refurbishment work. Ideal for exterior cladding, it can be adapted to your shapes and colour
requirements. For ventilated facades, it can be used as flat, bent or fabricated into cassettes.
Cleaning
Regular cleaning is strongly recommended.
Frequency of cleaning and the choice of the appropriate product will depend on the geographic
location of the building and degree of soiling.
Washing must be done in steps from the bottom upwards according to the following rules:
- manual cleaning or using special machines (industrial cleaner, foam machine, etc..)
Ensure that pressure is moderate.
- use of appropriate detergents
- after cleaning, systematic and thorough rinsing of the surfaces with the clean water to
remove the remains of the detergent.
I.E.:
The excess rinsing water must be wipped of with a sponge, rubber squeegee or chamois
leather, to avoid streaking.
Precautions
Never use products that dissolve the paint, namely:
- high alkaline products such as potash or caustic soda,
- acid products,
- abrasive scouring agents,
- solvents.